联系我们

  • 惠州市飞欣达电子设备有限公司
  • 联系人:黎岳云
  • 手机:13902486810
  • 地址:广东省惠州市博罗县石湾镇193县道,白沙段172号
  • 宁波办事处
  • 联系人:徐生
  • 手机:13857880207
  • 联系人:刘生
  • 手机:15606685375
  • 地址②:浙江省宁波市北仑区纬一路58号8栋3楼
  • DS-200C经济型单波峰焊锡机
DS-200C经济型单波峰焊锡机

分类:波峰焊系列

描述:

全国热线

13902486810

简介 / Introduction

展示

DS-200C经济型单波峰焊锡机

产品特点:

★ 炉胆采用小容量、小功率设计,经济实用,省电40%。
★ 特别加长预热区,预热曲线平稳,保证PCB板焊接效果。
★ 采用速度自行跟踪喷雾系统(三菱PLC控制),使喷雾面积随PCB宽度自动调节。
★ 内置助焊剂喷头自动清洗系统,长期使用亦无需清洗。
★具有经济运行功能,锡波随PCB自动起降,降低氧化量。

★锡渣正常工作氧化量<1.0公斤/8小时。

 

 

DS-200C Direct Single-Wave Crest Soldering machine

Features:

Solder pot adopts small capacity, low power design, economical and practical, saving electricity by 40%.

Specially extended preheating area, where the preheating profile is stable and can ensure the soldering effect of PCB boards.

Adopting speed auto-track spraying system(Mitsubishi PLC control),making the spraying area automatically adjusted with the width of PCB.

Embeded cleaning system for flux nozzle, no need cleaning even after used for a long time.

With economical operation function, the wave rises and falls with PCB and the quantity of oxidation is reduced.

Normal oxidation quantity of the lead-free soldering is1.0kg/8h.

(Specifications)
  Model No.DS-200C
 Control MethodSwitching Control
 PCB Size(mm)                         Max.200mm                              
 Conveyor Speed100~2400mm/min.
 Pre-heating ZoneLength:400mm×1    Room Temperature-200                        
 Solder Pot TemperatureRoom Temperature~300   
 PCB Conveyor Direction       L     R/L     R
 PCB Conveyor Height750±20mm
 PCB Soldering Angle4~6°
 Flux Spraying Pressure/Flow Rate3-4kgf/cm2    10~100ml/min.
 Flux CapacityApprox.4Liters
 Spraying Nozzle Movesteppr motor
 Solder Pot Capacity                                    Approx.100kg                                       
 Solder TypeNormal Solder
 Normal Power/Start up PowerApprox.2kw/7kw              Approx.2.5kw/9kw
 Power Supply3 phase 5 wires 380V 50/60Hz 
 Outside DimensionL2200×W800×H1500mm
 Weight300kg

技术参数
  型号DS-200C
 控制方式
按键式控制系统
 PCB板尺寸                                   Max.200mm                                   
 传输速度100~2400mm/min.
 预加热区               长度:400mm×1         温度:室温-200
 锡炉温度   室温~300
 PCB板传送方向       L     R/L     R
 PCB板传送高度750±20mm
 PCB板过锡角度4~6°
 松香喷雾气压/流量3-4kgf/cm2    10~100ml/min.
 松香容量Approx.4Liters
 喷头移动方式  步进电机
 锡炉容量                                   Approx.100kg                                     
 适用焊料类型普通焊料
 正常/启动功率Approx.2kw/7kw              Approx.2.5kw/9kw
 电源 三相五线制
 设备外形尺寸L2200×W800×H1500mm
 重量300kg

 

在线
客服

在线客服服务时间:9:00-24:00

选择下列产品马上在线沟通:

客服
热线

13902486810
7*24小时客服服务热线

关注
微信

关注官方微信
顶部
版权所有 copyright 飞欣达电子设备有限公司 备案号: